2400:-

Audio-Technica AT2022 Mikrofon-REA!

Det är alltid svårt att veta vilken mikrofon man ska välja. Vi på JAM hjälper dig gärna för att göra det enklare att välja rätt mikrofon för dig. Du kan alltid skriva ett mejl till oss så guidar vi dig med hur du skall gå tillväga för att välja den mikrofonen som passar dina behov mest. Skicka ett mail till mattias@jam.se och beskriv vad lite om vad för typ av mikrofon och vad du ska använda den till så hjälper vi dig!

REA! Tidigare 2995kr! The AT2022 is a condenser microphone designed for stereo recording.

Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.

X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility

Provides the spatial impact and realism of a live sound field

Battery operation allows use with most recording devices

Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise

User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns

Ideal for general stereo recording and field sound capture

Excellent channel separation

Included fuzzy windscreen offers excellent wind protection

Specifikationer:


- Elements: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: X/Y Stereo
- Frequency Range: 20–20,000 Hz
- Low FrequencyRoll-Off: 150 Hz, 6 dB/octave
- Open Circuit Sensitivity:-41 dB (8.9 mV) re 1V at 1 Pa
- Channel Balance: <2.5 dB
- Impedance: 200 ohms
- Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: (typical) 103 dB, 1 kHz at Max SPL
- Signal-To Noice Ratio: 75 dB, 1 kHz at 1 Pa
- Battery Type: 1.5V AA/UM3
- WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
- Battery Current Life: 1.2 mA / 500 hours typical (alkaline)
- Switch: Off, on/flat, on/roll-off
- Weight: 270 g (9.5 oz)
- Dimentions: 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter
- Output Conector: Integral 3-pin XLRM-type
- Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
-Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch

Liknande produkter till Audio-Technica AT2022 Mikrofon-REA!

Audio-Technica ATE-PRO44

Audio-Technica ATM650

Audio-Technica AT8010

Audio-Technica AT2020