2400:-

Audio-Technica AT2022 Mikrofon-REA!

REA! Tidigare 2995kr! The AT2022 is a condenser microphone designed for stereo recording.

Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.

X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility

Provides the spatial impact and realism of a live sound field

Battery operation allows use with most recording devices

Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise

User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns

Ideal for general stereo recording and field sound capture

Excellent channel separation

Included fuzzy windscreen offers excellent wind protection

Specifikationer:


- Elements: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: X/Y Stereo
- Frequency Range: 20–20,000 Hz
- Low FrequencyRoll-Off: 150 Hz, 6 dB/octave
- Open Circuit Sensitivity:-41 dB (8.9 mV) re 1V at 1 Pa
- Channel Balance: <2.5 dB
- Impedance: 200 ohms
- Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: (typical) 103 dB, 1 kHz at Max SPL
- Signal-To Noice Ratio: 75 dB, 1 kHz at 1 Pa
- Battery Type: 1.5V AA/UM3
- WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
- Battery Current Life: 1.2 mA / 500 hours typical (alkaline)
- Switch: Off, on/flat, on/roll-off
- Weight: 270 g (9.5 oz)
- Dimentions: 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter
- Output Conector: Integral 3-pin XLRM-type
- Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
-Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch

Liknande produkter till Audio-Technica AT2022 Mikrofon-REA!

Audio-Technica ATE-PRO44

Audio-Technica ATM650

Audio-Technica AT8010

Audio-Technica AT2020